Wrought Iron Metal Handrail on Two Bolt Down Posts and One Concrete In Post - Ozias - 2.6m - 4m

Wrought Iron Metal Handrail on One Bolt Down Post and Two Concrete In Post - Ozias - 2.6m - 4m

These versatile handrails are an affordable DIY method of adding a handrail to your property. The handrail pivots on the three posts, this allows the handrail to be installed down a small flight of steps. The handrail is designed to sit at approx 90cm high, the ideal height for holding onto.

Available in a choice of finishes:

Bare Metal - supplied with no coatings applied, allowing you to add the finish of your choice and colour.

Black Zinc Primed - one coat of a zinc based paint is applied to help prevent rust, your rail will arrive black and will require a top coat and then the usual ongoing maintenance you traditionally associate with wrought iron.

Specification

Top handrail - 40mm x 12mm convex half moon solid bar

Bolt down posts - 40mm x 40mm box section, with a 100mm x 100mm square plate, welded in an offset position, with four 11mm pre-drilled holes.

Concrete in post - 40mm x 40mm box section, left 500mm longer, so that this portion can be concreted into the ground.

The handrail extends 20cm beyond the post at each end. Therefore a 3.2m long handrail will consist of 20cm of handrail, then a post (4cm) with 272cm of handrail between the two posts, a second post (4cm), with a further 20cm protruding at the other side of the post. The third post is placed centrally along the handrail, in this case at 1.6m.

Supplied with thunder bolts for fixing to brick, concrete and wood.